联系我们

名称:北京电动门厂

电话:xxx

手机:xxx

邮箱:xxx

地址:xxx

新闻动态
平移式玻璃感应门由以下部件组成
平移式玻璃感应门由以下部件组成:
The translational glass induction door consists of the following components:
电气系统
electrical system
1、主控制器:它是自动门的指挥中心,通过内部编有指令程序的大规模集成块,发出相应指令,指挥马达或电锁类系统工作;同时人们通过主控器调节门扇开启速度、开启幅度等参数。  2、感应探测器:负责采集外部信号,如同人们的眼睛,当有移动的物体进入它的工作范围时,它就给主控制器一个脉冲信号;  3、动力马达:提供开门与关门的主动力,控制门扇加速与减速运行。  4、门扇行进轨道:就象火车的铁轨,约束门扇的吊具走轮系统,使其按特定方向行进。  5、门扇吊具走轮系统:用于吊挂活动门扇,同时在动力牵引下带动门扇运行。  6、同步皮带(有的厂家使用三角皮带):用于传输马达所产动力,牵引门扇吊具走轮系统。
1. Main Controller: It is the command center of automatic doors. It sends out corresponding instructions through large-scale integrated blocks with internal instruction programs to direct motor or electric lock systems. At the same time, people adjust the opening speed and opening range of door fans through the main controller. 2. Induction Detector: Responsible for collecting external signals, like people's eyes, when a moving object enters its working range, it gives the main controller a pulse signal; 3. Power motor: provide the initiative to open and close the door, control the acceleration and deceleration of the door. 4. Door-fan traveling track: just like the railway track of a train, the lifting wheel system of the door-fan is restrained to move in a specific direction. 5. Door-fan suspension wheel system: used for hanging movable door-fan, while driving the door-fan under power traction. 6. Synchronized belt (some manufacturers use triangular belt): used to transfer the power produced by motor, traction door and fan suspension wheel system.
7、下部导向系统:是门扇下部的导向与定位装置,防止门扇在运行时出现前后门体摆动。
7. Lower guiding system: It is the guiding and positioning device of the lower part of the door fan to prevent the front and rear door body from swinging when the door fan is running.
门体系统
Door body system
门体方面一般采用钢化玻璃为主,同时采用无框玻璃门夹、不锈钢边框和铝合金开模型材边框或一些特殊的材质。
Generally speaking, toughened glass is used as the main body, while frameless glass door clamp, stainless steel frame and aluminium alloy open model material frame or some special materials are used.
工作流程
Workflow
当门扇要完成一次开门与关门,其工作流程如下:
When the door is to be opened and closed once, the work flow is as follows:
感应探测器探测到有人进入时,将脉冲信号传给主控器,主控器判断后通知马达运行,同时监控马达转数,以便通知马达在一定时候加力和进入慢行运行。马达得到一定运行电流后做正向运行,将动力传给同步带,再由同步带将动力传给吊具系统使门扇开启;门扇开启后由控制器作出判断,如需关门,通知马达作反向运动,关闭门扇。
When the induction detector detects someone entering, it sends the pulse signal to the main controller, which notifies the motor to run after judging, and monitors the motor's speed, so as to inform the motor to exert force at a certain time and enter slow running. When the motor gets a certain running current, it runs forward, transfers power to the synchronous belt, and then transfers power to the hanger system by the synchronous belt to make the door fan open. After the door fan opens, the controller makes a judgment, if it needs to close the door, notifies the motor to move backwards, and closes the door fan.

联系方式

  1. 名称:北京电动门厂
  2. 电话:xxx
  3. 手机:xxx
  4. 邮箱:xxx
  5. 地址:xxx

版权 © 北京电动门厂 网址:www.juanlianmen58.com  推荐:保定门禁,北京车牌识别,北京电动门,北京伸缩门,北京铜门

网站建设及优化保定遨游网络公司