联系我们

名称:北京中海华科实业有限公司

手机:13910904497

地址:北京市房山区丁东路9号院

新闻动态
平移式玻璃感应门由以下部件组成
平移式玻璃感应门由以下部件组成:
The translational glass induction door consists of the following components:
电气系统
electrical system
1、主控制器:它是自动门的指挥中心,通过内部编有指令程序的大规模集成块,发出相应指令,指挥马达或电锁类系统工作;同时人们通过主控器调节门扇开启速度、开启幅度等参数。  2、感应探测器:负责采集外部信号,如同人们的眼睛,当有移动的物体进入它的工作范围时,它就给主控制器一个脉冲信号;  3、动力马达:提供开门与关门的主动力,控制门扇加速与减速运行。  4、门扇行进轨道:就象火车的铁轨,约束门扇的吊具走轮系统,使其按特定方向行进。  5、门扇吊具走轮系统:用于吊挂活动门扇,同时在动力牵引下带动门扇运行。  6、同步皮带(有的厂家使用三角皮带):用于传输马达所产动力,牵引门扇吊具走轮系统。
1. Main Controller: It is the command center of automatic doors. It sends out corresponding instructions through large-scale integrated blocks with internal instruction programs to direct motor or electric lock systems. At the same time, people adjust the opening speed and opening range of door fans through the main controller. 2. Induction Detector: Responsible for collecting external signals, like people's eyes, when a moving object enters its working range, it gives the main controller a pulse signal; 3. Power motor: provide the initiative to open and close the door, control the acceleration and deceleration of the door. 4. Door-fan traveling track: just like the railway track of a train, the lifting wheel system of the door-fan is restrained to move in a specific direction. 5. Door-fan suspension wheel system: used for hanging movable door-fan, while driving the door-fan under power traction. 6. Synchronized belt (some manufacturers use triangular belt): used to transfer the power produced by motor, traction door and fan suspension wheel system.
7、下部导向系统:是门扇下部井盖钢模具 U型槽模具 天津水处理设备 检查井钢模具 保定公司注册 u型槽模具 流水槽模具 的导向与定位装置,防止门扇在运行时出现前后门体摆动。
7. Lower guiding system: It is the guiding and positioning device of the lower part of the door fan to prevent the front and rear door body from swinging when the door fan is running.

联系方式

  1. 名称:北京中海华科实业有限公司
  2. 手机:13910904497
  3. 地址:北京市房山区丁东路9号院

版权 © 北京中海华科实业有限公司 网址:www.juanlianmen58.com  推荐:保定门禁,北京车牌识别,北京电动门,北京伸缩门,北京铜门

网站建设及优化保定遨游网络公司